Pages

Monday, January 17, 2011

Nokia Secret Codes

To check the IMEI (International Mobile Equipment Identity) Type-

*#06#

Information you get from the IMEI-

XXXXXX XX XXXXXX X

TAC FAC SNR SP

TAC = Type approval code

FAC = Final assembly code

SNR = Serial number

SP = Spare

To check the phones Software revision type-

*#0000#

Information you get from the Software revision-

V 05.31
18-02-99
NSE-3

1ST Line = Software revision
2ND Line = The date of the software release
3RD Line = Phone type

To enter the service menu type-

*#92702689# (*#WAR0ANTY#)

Serial number (IMEI)
Production date (MM/YY)
Purchase date (MM/YY) You can only enter the date once.
Date of last repair (0000=No repair)


Clock Stopping

To check weather your SIM Card supports clock stopping type-

*#746025625# (*#SIM0CLOCK#)

Revealing the Headphone and Car-Kit menus

Please note that if you do these next tricks, the new menus can't be erased without retoring the factory default settings. To do these tricks you need to short-circuit the pins on the bottom of the phone next to where you plug in you charger.

1. To activate the "Headset" menu, you need to short-circuit pins "3" and "4". After a short time the word "Headset" will be shown in the display. Menu 3-6 is now enabled.

2. To activate the "Car" menu, you need to short-circuit pins "4" and "5". After a short time the word "Car" will be shown in the display. Menu 3-7 is now enabled.

The Reboot trick

This should work on all software versions of the 6110.

1. Go to the Calendar (Menu-8)
2. Make a note or reminder.
3. Enter some text into the edit box.
4. Hold "Clear" until the whole text is cleared, then press "Back".
5. Press "0". The main screen will now be showing but a space appears on the screen. (you can't see it)
6. Enter 4 digits (e.g. 1234).
7. Use the down arrow to move the cursor to the left side of the numbers and the space (Down arrow twice).
8. Now enter 6 digits and press the call button.

Wait for a few seconds, the screen should start to flash and reboots. It should alsowork on other menus like the "Profiles" menu.

EFR Call Quality

To activate EFR (Enhanced Full Rate) Enter the code-*3370#

This improves call quality but decreases batterylife by about 5%

To deactivate it, Enter the code- #3370#

The James Bond Trick

If you short-circuit theleft middle and right pins on the bottom of the phone with all connections touching each other, the Nokia software hangs! The profile "Headset" will be activated. Before you do this just activate the "Automatic Answer" in the headset profile and set the ringing volume to "Mute". Now you can use your phone for checking out what people are talking about in a room. Just place it under a table in a room and call it. The phone receives the call without ringing and you can listen to what people are saying.

Reset Wallet Code

If you forgot wallet code for Nokia S60 phone, use this code reset: *#7370925538#
Note, your data in the wallet will be erased. Phone will ask you the lock code. Default lock code is: 12345

Press *#3925538# to delete the contents and code of wallet.

Bluetooth/WLAN Address

In some situations you will need to be able to provide the MAC address of your phone in order to gain access to a WIFI network, or to access a Bluetooth compatiable printer.

Here is how……
To find the Bluetooth device Address of your device, enter the code *#2820# in the standby mode.
To check the unique Media Access Control (MAC) address that identifies your device, enter *#62209526# in the standby mode.

 Factory Settings

This is possible to reset your Nokia to factory settings (Note that you will lose all your data). For this look in the manual of your phone.

Soft Reset will clear pending errors and bring your mobile to an initial state by restoring Factory setting. To operate this function on your mobile, the shortcut is: *#7380#

This function apparently works on almost all nokia mobile phones

It may happen that despite you have restored your mobile to factory setting, the error still exist. In this case, it is recommended that you opt for Hard reset

Enter the code: *#7370# and press Yes to confirm initialization. 

Important Notice: It is recommended that you save all important information on your phone (e.g: memo, contacts etc)

To make a Hard Reset on a Nokia phone that is not willing to turn on, just press simultaneously these 3 buttons: 
on/off + * + 3

No comments:

Post a Comment